Here's all you need to get started with your Soundbrenner Core.
1. Unbox, charge, place it on the rig
Unbox the Core and get to know the items. The Soundbrenner Core, the watch strap rig, the straps, charging cable, tuner mount, earplugs, and the carrying pouch.
Attach the charging cable to the magnetic port on the Core and charge the device at least 30%
Place the Core on the watch strap rig by simply dropping on the rig, make sure it is secure and wear it.
2. Get to know the buttons and navigation
You can navigate the Core by using the two buttons on the side and the wheel.
Use the bottom button to go forward, and the top button to go backward. Use the wheel to navigate left and right and change the values.
3. Get to know the touch surface
You can double-tap the touch surface quickly to start and pause the metronome, timer, and stopwatch.
You can tap at least three times to use the tap tempo of the metronome.
When tapping on the Core, always use two fingers and tap on the soundwave in the middle of the device.
4. Find your favorite vibrating metronome location
The Soundbrenner Core may be very convenient to wear on the wrist during daily usage but we recommend trying out new locations when you are practicing with it.
The experience of vibrating metronome is very personal and different for every instrumentist. Musicians get the best out of it after they find the location that works best for them.
Try practicing with the Core when its on your wrist, upper arm, ankles, legs, and chest. Please give each location some time to get used to it. On the side, experiment with different vibration intensities. You will find your favorite setup in a short time.
5. Install the tuner mount, attach the Core
If your instrument does not have a flat metal area where you can safely attach the magnetic tuner, you can use the tuner mount.
The tuner mount has a safe adhesive on it, which will not harm your instrument. Once the mount is attached on a safe surface, you can place the Core on the mount directly.
Remove the Core from its rig by twisting it and pulling it up. Now you can place the Core on the mount from the magnetic port on the side.
Your screen will flip depending on the need, and you can start tuning your instrument.
6. Discover the app
You can customize your Core, update your device, pair with your DAW and do much more with the app.
Download "The Metronome by Soundbrenner" app, pair your Soundbrenner Core and explore.